|
1998 Mercedes SLK-230 Cruise
Control Wiring Information |
| Constant 12V+ |
Red |
Ignition
Switch Harness at Rear of Fuse
Panel, White Connector or Use
Hot Side of Brake |
| Switched 12V+ |
Pink/Red |
Ignition
Switch Harness at Rear of Fuse
Panel, White Connector |
| Ground |
Use Chassis |
Near Cruise
Control Module |
| Hot Side of
Brake |
n/a |
|
| VSS Wire |
Green/White |
Or Green/Black
or Green/Yellow at Radio
Harness |
|
Notes: Vehicles with Manual
Transmission require Clutch
Switch. Some vehicles may
require a speed signal generator
and/or other parts/adapters not
listed above. Rostra� Cruise
Control module switch settings
may differ if you use a speed
signal generator or magnets and
a pick up coil. |