| 1997 Mercedes E-Class Cruise Control Wiring
Information |
| Constant 12V+ |
Red |
Ignition Switch Harness or Use Hot Side of Brake |
| Switched 12V+ |
Pink/Red |
Ignition Switch Harness |
| Ground |
Use Chassis |
Near Cruise Control Module |
| Hot Side of Brake |
n/a |
Brake Switch |
| Cold Side of Brake |
Black/Red |
Brake Switch |
| Tach |
Green/Yellow |
Coil |
| VSS Wire |
Green/White |
Or Green/Black or Green/Yellow at Radio Harness |
|
Notes: Vehicles with Manual
Transmission require Clutch Switch. Some vehicles may require a speed
signal generator and/or other parts/adapters not listed above. Rostra�
Cruise Control module switch settings may differ if you use a speed
signal generator or magnets and a pick up coil. |