فلاش طابعة CANON ip1000 PIXMA

[alfawalidou]

عندي طلب من الاخوة ارجو المساعدة
عندي طابعة Canon Ip1000 Pixma
أصبحت لما اعمل بها طباعة تخر لي رسالة تفيد بأن الطابعة يجب ان ترجع الى المصنع و لا يمكنك ان تستعملها بعد الآن
حيث ان هذه المشكلة ظهرت مع الكثير من الذين لهم نفس النوع
حيث انها تتوقف عن العمل بعد طباعة حوالي 1000 ورقة و هذه خطة من المصنع
و سمعت ان هناك برنامج عبارة عن Patch كي تصبح مفعلة للطباعة من جديد

تحياتي

[tiger-1]

الرجاء عمل ما يوجد في النص الانكليزي
My pixma IP1000 has messages "Waste Ink Full"

I try to reset with manual service mode :

- Turn off the printer, and disconnect the printer cable
- Press and hold the POWER button, turn on the printer
- The Indicator (LED) should be green
- Press and release the RESUME button, the Indicator (LED) should be orange
- Press and release the RESUME button again, the Indicator (LED) should be green
- Release both button

After I try, it work successfull. But, when I turn off the printer and I turn on again I has messages "Waste Ink Full"

How to reset permanently? Averybody, anybody, when you have another service mode help me on my printer ploblem

Thank's






I've tried this one and success, thank you :-)

4 step to Reset waste ink tank counter CANON PIXMA iP 1000
STEP 1:- Disconnect printer from AC power
STEP 2:- Press and HOLD the POWER button, and connect printer to AC power
STEP 3:- release the the POWER button
STEP 4:- Press the POWER button again




Here's the steps for reseting "Waste Ink Full" problem at iP1000

Step 1: Manual for Service mode (1st method)
1. Unplug POWER and USB cables.
2. Open door, PRESS and HOLD the POWER button.
3. Connect the POWER cable.
4. Close door, then release POWER button.
5. Power ON your printer a usual (It should not blinking anymore)

Step 1: Manual for Service mode (2nd method)
1. Unplug POWER and USB cables.
2. PRESS and HOLD the POWER button,
3. Connect the POWER cable.
3. Release the the POWER button
4. Power ON your printer a usual (It should not blinking anymore)


Step 2 : Software for Permanant (1st method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1000",
http://www.printersiam.com/data/download/iP1000%20Service%20Tool.zip
3. Select (USB PORT)
4. Choose (SET DESTINATION 1)
It should be reseted already, but somehow it start blinking again if you ever unpluging AC POWER cable. So try the 2nd method by using ServiceTool for IP1500

Step 2 : Software for Permanant (2nd method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1500",
http://www.printersiam.com/data/download/iP1500%20Service%20Tool.zip
3. Select (USB PORT)
4. Choose CLEAR WASTE INK COUNTER - MAIN
5. Choose CLEAR WASTE INK COUNTER - PLATEN
It should be working, coz my printer now now work normally


I tell you what. Before you decide to reseting the waste ink counter, you should really clean up the ink absorber, or else you will find the ink watse absorber overflow

[alfawalidou]

الله يبارك فيك و يجازيك بالخير

أخي الفاضل ،بإذن الله سأجرب الطريقة

مع اني لاحظت أنه توجد طريقتين واحد يدوية

و الثانية بواسطة برنامج

سأجربهما الاثنين طبعا و لك خالص الشكر و التقدير


تحياتي

[faresfa]

من فضلكم اريد فلاش الطابعة
canon ip1000
وبارك الله فيكم يا اخواني.

[nabil bba]

فلاش الطابعة
canon ip1000

http://www.savefile.com/files/1045774


User guide:


Unzip downloaded file.
Run GeneralTool.exe
Select the connected USB port number from USB port
Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.

[محمد ناصري]

الرجاء عمل ما يوجد في النص الانكليزي
My pixma IP1000 has messages "Waste Ink Full"

I try to reset with manual service mode :

- Turn off the printer, and disconnect the printer cable
- Press and hold the POWER button, turn on the printer
- The Indicator (LED) should be green
- Press and release the RESUME button, the Indicator (LED) should be orange
- Press and release the RESUME button again, the Indicator (LED) should be green
- Release both button

After I try, it work successfull. But, when I turn off the printer and I turn on again I has messages "Waste Ink Full"

How to reset permanently? Averybody, anybody, when you have another service mode help me on my printer ploblem

Thank's






I've tried this one and success, thank you :-)

4 step to Reset waste ink tank counter CANON PIXMA iP 1000
STEP 1:- Disconnect printer from AC power
STEP 2:- Press and HOLD the POWER button, and connect printer to AC power
STEP 3:- release the the POWER button
STEP 4:- Press the POWER button again




Here's the steps for reseting "Waste Ink Full" problem at iP1000

Step 1: Manual for Service mode (1st method)
1. Unplug POWER and USB cables.
2. Open door, PRESS and HOLD the POWER button.
3. Connect the POWER cable.
4. Close door, then release POWER button.
5. Power ON your printer a usual (It should not blinking anymore)

Step 1: Manual for Service mode (2nd method)
1. Unplug POWER and USB cables.
2. PRESS and HOLD the POWER button,
3. Connect the POWER cable.
3. Release the the POWER button
4. Power ON your printer a usual (It should not blinking anymore)


Step 2 : Software for Permanant (1st method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1000",
http://www.printersiam.com/data/download/iP1000%20Service%20Tool.zip
3. Select (USB PORT)
4. Choose (SET DESTINATION 1)
It should be reseted already, but somehow it start blinking again if you ever unpluging AC POWER cable. So try the 2nd method by using ServiceTool for IP1500

Step 2 : Software for Permanant (2nd method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1500",
http://www.printersiam.com/data/download/iP1500%20Service%20Tool.zip
3. Select (USB PORT)
4. Choose CLEAR WASTE INK COUNTER - MAIN
5. Choose CLEAR WASTE INK COUNTER - PLATEN
It should be working, coz my printer now now work normally


I tell you what. Before you decide to reseting the waste ink counter, you should really clean up the ink absorber, or else you will find the ink watse absorber overflow
أرجو منك أخي الكريم ترجمة هذا النص الأنكليزي إلى اللغة العربية لأنني ضعيف في اللغة الأنكليزية و شكرا.

[الطابلوج]

السلام عليكم يا اخي هناك طريقة بسيطة لكي تشتغل معك الطابعة وهي الضغط على مفتاح التشغير وسحب كابل الكهرباء ثم اعادة توصيله مع الاستمرار في الضغط / مفتاح التشغيل وستعمل معك وشكرا