اضافة برتوكول NWLink IPX/SPX/NetBIOS Compatible Transport Protocol للتشارك في الملفات والالعاب بنظام التشغيل وندوز
Configuring your Win XP Machine for DHCP
1. Go to Start Button.
Win XP Start Networks
Go to the Start Button, then up to Settings, and across and down to Network Connections as shown above.
2. Open the Network Connections Panel
Win XP Networks Protocols
Right click on the icon that says "Local area Connections", then go down to and click on Properties.
3. Open the Local Area Connection Properties
Win XP Networks Protocols
Single Click on the icon that says "Internet Protocl (TCP/IP) ".
4. Open TCP/IP Configuration for Your Ethernet Card
Win XP network Protocols
Click on the "Properties" tab. This is shown above
5.Obtain an IP Address Automatically
Win XP Protocols
From the "General" tab, select "Obtain an IP address automatically" by clicking the appropriate radio button. You will also need to select
"Obtain DNS server address automatically" by clicking the its radio button as shown above.
6. Make the Changes Take Affect
a. Click OK on the "Internet Protocol (TCP/IP) Properties" screen.
b. Click OK on the "Local Area Connection Properties" Screen.
c. Click OK when asked to restart your computer.
7. You Are DONE!
IPX/SPX
If the existing network uses IPX/SPX for File and Printer Sharing, you can add that protocol to the Windows XP computer. IPX/SPX is fully supported in XP. In the connection's Properties, click the Install button to add a network component. XP will ask what type of network component to install.
Click Protocol and Add.
Click NWLink IPX/SPX/NetBIOS Compatible Transport Protocol and click OK. Two NWLink items are added to the connection's Properties
الساعة معتمدة بتوقيت جرينتش +3 الساعة الآن: 09:07 AM
موقع القرية الالكترونية غير مسؤول عن أي اتفاق تجاري أو تعاوني بين الأعضاء
فعلى كل شخص تحمل مسئولية نفسه إتجاه مايقوم به من بيع وشراء وإتفاق وأعطاء معلومات موقعه
التعليقات المنشورة لا تعبر عن رأي موقع القرية الالكترونية ولايتحمل الموقع أي مسؤولية قانونية حيال ذلك (ويتحمل كاتبها مسؤولية النشر)